SUBMERSIBLE (POLYPROPYLENE) PUMP
Application:
* Dewatering
* Drainage of Clearly or Slightly dirty water, for domestic use.
* Lifting of waste water even with suspended solids, for domestic use.
Standard Features:
* Pump Installation in vertical position with horizontal delivery port.
* Pumps are delivered with elbow for vertical delivery port.
* Pressure port: G1-1/2"
* Cable Length: 10 meters
* Protection class: IP68 (upto 5 meters immerged)
* Temperature range: +5 - 35 Deg Celcius
* Maximum number of starts per hour: 60
* Density of fluid: 1 to 1.06
* PH of the fluid: 6 - 8
* Minimum Pumping level: Drain / Waste - 20mm / 40mm
* No Non return valve.
Technical Data:
Power: 0.5 HP / 1 HP
Maximum Immersible depth: 5 meters
Phase: Single (230V)
Performance Chart:
|
|
|
HEAD IN METERS |
||||||
Power Rating |
Free Passage |
|
2 |
3 |
4 |
5 |
6 |
7 |
8 |
0.37 KW / 0.5 HP |
5 mm |
Discharge in LPM |
12000 |
11100 |
10200 |
6900 |
6000 |
3000 |
|
0.75 KW / 1 HP |
20 mm |
|
14100 |
12000 |
11100 |
9000 |
6000 |
4200 |
Material of Construction:
Pump Housing: Polypropylene (PP)
Impeller: PA6 GF30
Shaft: AISI 416
Motor Housing: Fe 370 Galvanised